Be the first to review “5GHz AC867 Wave2 Outdoor Long Range Wireless Customers Premise Equipment (CPE)”
You must be logged in to post a review.
Product Highlight
Powerful onboard quad-core processors combine with new 11ac Wave 2 technology that is up to 30% faster than previous 11ac 3×3 devices. It offers greater connection reliability and high bandwidth performance over long ranges for point-to-point or point-to-multipoint connectivity with reduced interference.
Quad-Core CPU, 717 MHz “Turbo Engine”
802.11ac 2×2 Wave 2 MU-MIMO
Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients
High Transmit Power Extends Wi-Fi PtP
Integrated 14 dBi High-Gain Directional Antennas
IP55-Rated Weatherproof & Dustproof Housing
You must be logged in to post a review.
Technical Specifications
Standards
IEEE 802.11a/n/ac on 5 GHz
Processor
Qualcomm® 717 MHz Quad-Core CPU
4x ARM Cortex A7
Antenna
High-Gain Directional 14 dBi Antenna
Physical Interface
2 x 10/100/1000 Base-T, RJ-45 Gigabit Ethernet Ports
1 x Reset Button
Link Aggregation Achieves 2 Gbps Throughput
LED Indicators
Power
LAN1
LAN2
WLAN
Signal
Power Source
Power-over-Ethernet: 24V Proprietary PoE
Active Ethernet (PoE)
Link Aggregation Achieves 2 Gbps Throughput
Maximum Power Consumption
7.5W
Surge Protection
Line to Line: 1 KV
Line to Ground: 2 KV
ESD Protection
Contact: 4KV
Air: 8 KV
Wireless & Radio Specifications
Operating Frequency
5 GHz
Operation Modes
Access Point Mode (AP mode)
Client Bridge Mode (CB Mode)
WDS: WDS AP, WDS Bridge, WDS Station
Frequency Radio
5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz
Transmit Power
Up to 23 dBm
Tx Beamforming (TxBF)
Radio Chains/Spatial Stream
2 x 2:2
SU-MIMO
5GHz – Two (2) Spatial Stream SU-MIMO up to 867 Mbps to individual
2×2 VHT40 client devices
MU-MIMO
5GHz – Two (2) Spatial Stream Multi User (MU) MIMO for up to 867Mbps to
two (2) MU-MIMO capable wireless devices simultaneously
Supported Data Rates (Mbps):
5 GHz: Max 867
802.11a: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)
Supported Radio Technologies
802.11a/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2×2 MIMO with 2 Streams
Channelization
802.11ac Supports Very High Throughput (VHT)—VHT 20/40/80 MHz
802.11n Supports High Throughput (HT)—HT 20/40 MHz
802.11n/ac Packet Aggregation: AMPDU, ASPDU
Supported Modulation
802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management Features
Multiple BSSID
Supports 8 SSIDs
VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging
VLAN Pass-Through
Management VLAN
Spanning Tree
Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service)
Complaint with IEEE 802.11e Standard
WMM
SNMP
v1, v2c, v3
MIB
I/II, Private MIB
Deployment Options
Stand-Alone (Individually Managed)
Managed Mode (w/ezMaster/Neutron Series Switch)
Stand-Alone Management Features
Auto Channel Selection
Auto Transmit Power
Wireless STA (Client) Connected List
Guest Network
Fast Roaming (802.11k & 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
Traffic Shaping
VLANs for Access Point – Multiple SSIDs
Backup/Restore Settings
Auto Reboot
E-Mail Alert
Site Survey
Save Configuration as Users Default
Control Features
Managed Mode (w/ezMaster/Neutron Switch)
Distance Control (ACK Timeout)
Multicast Supported
Wi-Fi Scheduler
Client Traffic Status
RADIUS Accounting
Power Save Mode (U-APSD Support)
CLI Support
HTTPS
Wireless Security
WEP Encryption 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP Using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List
SSH Tunnel
Client Isolation
Wireless Management Features (w/ezMaster/Neutron Switch)
AP Auto Discovery & Provisioning
AP Auto IP Assignment
AP Group Management
Auto AP Rebooting
AP Device Name Editing
AP Radio Settings
Traffic Shaping
Fast Roaming (802.11k & 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
AP Client Limiting
Client Fingerprinting
AP VLAN Management
VLANs for AP – Multiple SSIDs
Secured Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Email Alert
Wireless Traffic & Usage Statistics
Real-time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Wireless Coverage Display
Secure Control Messaging (SSL Certificate)
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import/Export
Bulk Firmware Upgrade Capability
Intelligent Diagnostics
Kick/Ban Clients
Wi-Fi Scheduler
Environmental & Physical
Temperature Range
Operating: -4 ºF~140 ºF (-20 ºC~60 ºC)
Storage: -22 ºF~176 ºF (-30 ºC~80 ºC)
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Waterproof
IP55-Rated Enclosure
Dimensions & Weight
ENS500-AC Device
Weight: 0.65 lbs. (0.29 kg)
Width: 3.93” (100 mm)
Length: 7.20” (185 mm)
Height” 1.08” (27 mm)
Package Contents
1 – ENS500-AC Outdoor Bridge
1 – PoE Adapter (EPA2406GP)
2 – Pole-Mounting Brackets
1 – Wall-Mount Screw Set
1 – Power Cord
1 – Quick Installation Guide
Certifications
FCC
CE
Accessories
Reviews
There are no reviews yet.